BS EN 13476-2-2007 无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.A型、有平滑内外表面的管和配件及系统用规范

百检网 2021-08-03
标准号:BS EN 13476-2-2007
中文标准名称:无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.A型、有平滑内外表面的管和配件及系统用规范
英文标准名称:Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Specifications for pipes and fittings with smooth interna
标准类型:Q81
发布日期:2007/7/31 12:00:00
实施日期:2007/7/31 12:00:00
中国标准分类号:Q81
国际标准分类号:93.030
引用标准:EN 476;EN 580;EN 681-1;EN 681-2;EN 681-4;EN 727;EN 728;EN 744;EN 922;EN 1053;EN 1055-1996;EN 1277;EN 1401-1;EN 1411;EN 1437;EN 1446;EN 1852-1;EN 1905;EN 1979;EN 12061;EN 12256;EN 12666-1;EN 13476-1-2007;EN 13476-3;CEN/TS 14541-2007;EN 14741;EN 14758-1;EN
适用范围:This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittingsand the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene(PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage andsewerage systems.This part is applicable to pipes and fittings with smooth internal and external surfaces, designated as Type A.It specifies test methods and test parameters as well as requirements.This part is applicable to:a) structured-wall pipes and fittings, which are intended to be used buried underground outside the buildingstructure; reflected in the marking of products by “U”;b) structured-wall pipes and fittings, which are intended to be used buried underground both outside(application area code “U”) and within the building structure (application area code “D”); reflected in themarking of products by “UD”.This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomericring seal joints as well as welded and fused joints.This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, applicationclasses, and tolerance classes and gives recommendations concerning colours.NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects,taking into account their particular requirements and any relevant national regulations and installation practices or codes.NOTE 2 For dimensions larger than DN 1200 OD/ID this document may be applied regarding appearance, colour,physical and mechanical characteristics as well as performance requirements.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司
相关商品