BS 4500-2009 公差和配合.锥形配合系统和从C=1:3到1:500,长度从6 mm至630 mm直径小于等于500 mm的锥形的公差系统指南

标准号：BS 4500-2009
中文标准名称：公差和配合.锥形配合系统和从C=1:3到1:500,长度从6 mm至630 mm直径小于等于500 mm的锥形的公差系统指南
英文标准名称：Limits and fits - Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
标准类型：J04
发布日期：2009/9/30 12:00:00
实施日期：2009/9/30 12:00:00
中国标准分类号：J04
国际标准分类号：17.040.10
引用标准：BS EN 20286-1
适用范围：This British Standard gives guidance on a system of cone fits andtolerances for cones from C = 1:3 to 1:500 and lengths from 6 mmto 630 mm.The appropriate tolerances of this British Standard can also be usedfor prismatic workpieces, for example wedges.This British Standard applies to cones which are dimensioned andtoleranced according to BS ISO 3040, Method 1, Basic Taper method.This means that the tolerances limit the variation of penetration ofmating surfaces, each surface being within two limiting profiles of thesame taper corresponding to the maximum material condition (MMC)and the least material condition (LMC).This British Standard is derived from BS EN 20286, and is a complementto BS EN ISO 1119.NOTE For dimensioning and tolerancing cones on drawings, seeBS ISO 3040.