BS EN 13941-2009+A1-2010 区域供暖用预绝热连接管的设计与安装

标准号：BS EN 13941-2009+A1-2010
中文标准名称：区域供暖用预绝热连接管的设计与安装
英文标准名称：Design and installation of preinsulated bonded pipe systems for district heating
标准类型：Q83
发布日期：2009/7/31 12:00:00
实施日期：2009/7/31 12:00:00
中国标准分类号：Q83
国际标准分类号：23.040.01;91.140.10
适用范围：This European Standard specifies rules for design, calculation and installation for preinsulated bonded pipesystems for buried hot water distribution and transmission networks (cf. Figure 2) with pipe assemblies inaccordance with EN 253, for continuous operation with hot water at various temperatures up to 120?C andoccasionally with peak temperatures up to 140?C and maximum internal pressure 25 bar (overpressure).Application rule:For larger pipe dimensions and pressures below 25 bar wall thickness bigger than specified in EN 253 can be required for straight pipes, bendsand tees.The principles of the standard can be applied to preinsulated pipe systems with pressures higher than 25 bar, provided that special attention ispaid to the effects of pressure. Adjacent pipes belonging to the network (e.g. pipes in ducts, valve chambers, road crossings above ground etc.)can be designed and installed according to this standard.The standard assumes use of treated water, which by softening, demineralisation, deaeration, adding of chemicals,or otherwise has been treated to prevent internal corrosion and deposits in the pipes.This standard is not applicable for such units as:a) pumps,b) exchangers,c) boiler installations, tank installations,d) consumer installations.However, the full functional ability and durability of such units should be ensured in consideration of the impactsfrom the district heating system and other impacts occurring from the conditions under which they have beeninstalled.Guidelines for product quality inspection and in situ tests of joints are given in Annex A of EN 448-2009, Annex D ofEN 253-2009, Annex A of EN 488-2009 and Annex B of EN 489-2009.Guidelines for welding of polyethylene casing are given in Annex B of EN 448-2009.The estimation of expected life with continuous operation at various temperatures is outlined in Annex B ofEN 253-2009.