BS EN 14963-2006 屋顶覆盖物.带或不带竖立支架的连续塑料天窗.分级、要求和试验方法

标准号：BS EN 14963-2006
中文标准名称：屋顶覆盖物.带或不带竖立支架的连续塑料天窗.分级、要求和试验方法
英文标准名称：Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
标准类型：P32
发布日期：2006/11/30 12:00:00
实施日期：2006/11/30 12:00:00
中国标准分类号：P32
国际标准分类号：91.060.20
引用标准：EN 410;EN 596;EN 673;EN 674;EN 675
适用范围：This European Standard specifies requirements for continuous rooflights made of plastic materials (e.g.GF-UP, PC, PMMA, PVC) with or without bearing profiles to be used with upstands made of e.g. GF-UP, PVC,steel, aluminium, wood or concrete, for laying in roofs, which serve the purpose of lighting by means ofdaylight and, possibly, of ventilating interior spaces by means of opening devices.This European Standard applies to continuous rooflights without upstand and to continuous rooflights, where asingle manufacturer provides all components of the rooflight with upstand, which are bought in a singlepurchase. Products covered by this European Standard may be supplied as continuous rooflights with andwithout upstand and rooflights intended to be used with an upstand, for which the upstand is specified, but notsupplied.It applies to continuous rooflights when mounted with an inclination δ in the longitudinal direction not morethan 10° to the horizontal and not more than 10° in the transversal direction (see Figure 1):a) with bearing profiles: symmetrical, angled, curved (see Figure 2) or flat (see Figure 3); constructed with bearing profiles parallel to the span and with a rectangular ground plan;b) without bearing profiles: symmetrical, angled or curved with an α angle not more than 45° (measured to the horizontal at theline of fixing, see Figure 4); constructed with a span (width) lower than or equal 2,5 m and with a rectangular ground plan.This European Standard applies to continuous rooflights, including barrel vault rooflights, with a rectangularground plan of plastic glazing laying in roofs having, in addition a minimum distance of b/3(b = effective span of rooflights, corresponding to the light opening). The upstands may be self-supporting ornon self-supporting.The design of the upstand is not part of this European Standard. Upstands can be prefabricated or sitefabricated. Prefabricated upstands are to be considered as part of the continuous rooflight. Site fabricatedupstands are not covered by this European Standard.This European Standard does not include calculation with regard to works, design requirements andinstallation techniques.The possible additional functions of smoke and heat ventilation in case of fire, and/or roof access are outsidethe scope of this European Standard.