DIN EN 13369-2018 预制混凝土产品的通用规则; 德文版本EN 13369-2018

标准号：DIN EN 13369-2018
中文标准名称：预制混凝土产品的通用规则; 德文版本EN 13369-2018
英文标准名称：Common rules for precast concrete products; German version EN 13369:2018
标准类型：Q14
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q14
国际标准分类号：91.100.30
引用标准：DIN ISO 3951-1-2016;EN 206+A1-2016;EN 934-2+A1-2012;EN 1008-2002;EN 1097-6-2013;EN 1745-2012;EN 1934-1998;EN 1990-2002;EN 1992-1-1-2004;EN 1992-1-2-2004;CEN/TS 1992-4 Reihe;EN 1997;EN 10080-2005;prEN 10138-1-2000;prEN 10138-2-2000;prEN 10138-3-2000;prEN 1
适用范围：This European document specifies the requirements, the basic performance criteria and the evaluation of conformity for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206-1 with no appreciable amount of entrapped air other than entrained air. Concrete containing fibres for other than mechanical properties steel, polymer or other fibres is also covered. It does not cover prefabricated reinforced components of lightweight aggregate concrete with open structure. It may also be used to specify products for which there is no standard. Not all of the requirements (Clause 4) of this draft are relevant to all precast concrete products. If a specific product standard exists, it takes precedence over this standard.The precast concrete products dealt with in this draft are factory produced for building and civil engineering works. This document may also be applied to products manufactured in temporary plants on site if the production is protected against adverse weather conditions and controlled following Clause 6 provisions. The analysis and design of precast concrete products is not within the scope of this standard but it does offer, for non-seismic zones, information about:- the choice of partial safety factors defined by the pertinent Eurocode;- the definition of some requirements for prestressed concrete products.