DIN EN 15001-2-2010 天然气基础设施.工业设备用操作压力大于0.5bar的气体设备管道工程和工业级非工业设备用操作压力大于5bar的气体设备管道工程.第2部分:试运转、操作和维修用详

标准号：DIN EN 15001-2-2010
中文标准名称：天然气基础设施.工业设备用操作压力大于0.5bar的气体设备管道工程和工业级非工业设备用操作压力大于5bar的气体设备管道工程.第2部分:试运转、操作和维修用详细功能要求.德文版本EN 15001-2-2008
英文标准名称：Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning
标准类型：P94
发布日期：1999/12/31 12:00:00
实施日期：2010/4/1 12:00:00
中国标准分类号：P94
国际标准分类号：23.040.01
引用标准：EN 15001-1;EN 12954;EN 60079-10;EN 60079-14;EN 60079-17;EN 60079-29-1
适用范围：This European standard specifies detailed functional requirements for the commissioning, operation and maintenance of industrial gas installations operating above 0, 5 bar and domestic or commercial gas installations above 5 bar. For non-industrial [domestic and commercial] gas installations up to 5 bar, EN 1775 applies. This European standard also applies to gas installations up to 5 bar not within the scope of EN 1775 or other European standards, as well as to mixed installations [industrial and non-industrial]. The inlet connection to the appliance is normally the inlet isolation valve but can include the pipework downstream of this valve- if this pipework is not covered by the appliance standard, then this standard applies. The requirements for design, materials, construction, inspection and testing of gas installations over 0, 5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations are given in prEN 15001-1. In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 ℃ and 1,013 mbar absolute pressure. These gases, are commonly referred to as manufactured gas, natural gas or liquid petroleum gases (LPG). They are also referred to as first, second or third family gases (see table 1 of EN 437:1993). LPG storage tanks (including all ancillaries fitted directly to the tanks) are excluded see EN 14570. Also excluded are LPG installations and sections of LPG installations operating at vapour pressure. In this standard, all pressures are gauge pressures unless otherwise stated.