ANSI C119.5-2009 绝缘刺穿连接器系统,额定电压小于等于600 V(低压高空捆扎电缆与绝缘和非绝缘线路导线)

标准号：ANSI C119.5-2009
中文标准名称：绝缘刺穿连接器系统,额定电压小于等于600 V(低压高空捆扎电缆与绝缘和非绝缘线路导线)
英文标准名称：Insulation Piercing Connector Systems, rated 600 volts or less (low voltage aerial bundled cables and insulated and non-insulated line wires)
标准类型：L23
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：L23
国际标准分类号：29.120.20
适用范围：This standard covers insulation piercing connectors used for making electrical connections between insulated, insulated-to-bare, and bare-to-bare conductors rated 600 V or less and 90°C (low voltage aerial bundled cables and bare and insulated line wires) on overhead distribution lines for electric utilities. Underground insulation piercing connector systems rated at 600 V are covered by ANSI C119.1. Since cable and insulation types exist in very different types and configurations, insulation piercing connectors can not be designed for the full range of cable and insulation possibilities (cable cross-section and material, insulation material and thickness). The manufacturer is to indicate the cable and insulation types the connector is designed for, and conformity to this standard shall be established by testing with these cable and insulation types. This standard establishes the electrical, mechanical and environmental test requirements for electrical insulation piercing connectors. This standard is not intended to recommend operating conditions or temperatures.