IEC 60534-9-2007 工业过程控制阀.第9部分:步进输入反应测量的试验程序

标准号：IEC 60534-9-2007
中文标准名称：工业过程控制阀.第9部分:步进输入反应测量的试验程序
英文标准名称：Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
标准类型：N18
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：N18
国际标准分类号：23.060.40;25.040.40
引用标准：IEC 60534-1;IEC 60534-4
适用范围：This part of IEC 60534 defines the testing and reporting of the step response of control valves that are used in throttling closed—loop control applications．A control valve consists of the complete，ready-to-use assembly of the control valve body，the actuator，and any required accessories．The most probable accessory is a valve positioner．NOTE For background，refer to technical report ANSI／ISA-TR75 25．02[6]The object of this standard is to define how to test，measure，and report control valve response characteristics in an open—loop environment．This information can be used for process control applications to determine how well and how fast the control valve responds to the control valve input signal．This standard does not define the acceptable control valve performance for process control nor does it restrict the selection of controI valves for any application．If this standard is used for evaluation or acceptance testing，the parties may agree to documented variations from these requirements．The information using the defined test methods is specifically applicable to closed-loop feedback control but may have some application to open—loop control applications．It does not address valves used in on-off controI service．Tests specified in this standard may not be sufficient to measure the performance required for alI applications．Not alI control valve applications will require this testing．