SAE MA 3375C-2011 符合UNS S66286 900 MPa抗拉强度公制采购规范的耐腐蚀和耐热钢螺栓

标准号：SAE MA 3375C-2011
中文标准名称：符合UNS S66286 900 MPa抗拉强度公制采购规范的耐腐蚀和耐热钢螺栓
英文标准名称：Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric
标准类型：V20
发布日期：2011/8/9 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V20
国际标准分类号：49.030.20
引用标准：ASME B46.1-2009;ASTM D 3951-2010;ASTM E 8-2004;ASTM E 112-2010;ASTM E 139-2011;ASTM E 140-2007;ASTM E 1417-2005;SAE AMS 2759/3;SAE AMS 5731;SAE AMS 5732;SAE AMS 5734;SAE AMS 5737;SAE AS 3062;SAE AS 3063;SAE MA 1370-1990;SAE MA 1518;SAE MA 1520-1987;SAE MA
适用范围：This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Number System as UNS S66286. The following specification designations and their properties are covered: MA3375 900 MPa minimum ultimate tensile strength at room temperature; MA3375-1 900 MPa minimum ultimate tensile strength at room temperature, 480 MPa stress-rupture strength at 650 degrees C; MA3375-2 900 MPa minimum ultimate tensile strength at room temperature, 590 MPa minimum ultimate shear strength at room temperature. Two types of studs are covered as follows: Type I - studs with stud end thread having special oversize pitch diameter and lead thread with undersize pitch diameter, while nut end thread is standard size; and Type II - studs with stud end thread and nut end thread standard size.