IEEE C 37.41-2008 高压(>1000 V)熔断器,熔断器和熔断,分配闭合式单极空气开关,熔断器断开开关以及与这些设备配套使用的熔断器连线和附件的设计试验

标准号：IEEE C 37.41-2008
中文标准名称：高压(>1000 V)熔断器,熔断器和熔断,分配闭合式单*空气开关,熔断器断开开关以及与这些设备配套使用的熔断器连线和附件的设计试验
英文标准名称：Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
标准类型：K31
发布日期：2008/11/10 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K31
引用标准：ANSI C37.42;ANSI C37.46;ANSI C37.47;ANSI C63.2-1987;IEC 60282-1;IEC 60282-2;IEEE 4-1995;IEEE C37.20.3;IEEE C37.40;IEEE C37.43;IEEE C37.45;IEEE C37.48
适用范围：This standard specifies design test requirements for high-voltage (above 1000 V) fuses, distributionenclosed single-pole air switches, disconnecting cutouts, fuse disconnecting switches, and accessories foruse on ac power and distribution systems. Devices with rated maximum voltages to 170 kV are covered.The devices to which this standard applies are as follows:a) Distribution and power class expulsion type fusesb) Distribution and power class current-limiting type fusesc) Distribution and power class fuse disconnecting switchesd) Item a) through item c) used in fuse enclosure packagese) Fuse supports of the type intended for use with distribution and power class fuses, and fusedisconnecting switchesf) Fuse and disconnecting cutoutsg) Disconnecting devices created by the use of a removable switch blade in a distribution or powerclass fuse supporth) Distribution class enclosed single-pole air switchesi) Distribution class and power class expulsion, current-limiting, and combination types ofexternal capacitor fuses used with a capacitor unit, groups of units, or capacitor banksj) Backup current-limiting fuses (“motor-starter fuses”) used in conjunction with high-voltageClass E2 motor starters (see ANSI/UL 347-2000 [B1])1k) Fuse links when used exclusively with distribution class and power class fuses, and distributionclass and power class fuse disconnecting switchesl) Item a) through item d) and item f) through item i) having integral load-break meansThis standard specifies the minimum testing requirements for fuses and related devices. Suchstandardization is needed to ensure uniform minimum product testing for devices within the documentscope. Test areas covered are based on historical experience.