ISO 28927-10-2011 手持便携式电动工具.振动辐射的评价用试验方法.第10部分:冲击钻,冲击锤和冲击压碎机

标准号：ISO 28927-10-2011
中文标准名称：手持便携式电动工具.振动辐射的评价用试验方法.第10部分:冲击钻,冲击锤和冲击压碎机
英文标准名称：Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
标准类型：K64
发布日期：2011/4/15 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K64
国际标准分类号：13.160;25.140.10
引用标准：ISO 2787;ISO 5349;ISO 5391-2003;ISO 17066;ISO 20643-2005;EN 12096
适用范围：This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at thehandles of hand-held power driven percussive machines with and without rotary action [portable rock drills,plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers),riveting hammers, chipping hammers, pick hammers or similar]. It is a type-test procedure for establishing themagnitude of vibration in the gripping areas of a machine fitted with an inserted tool bit.This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by othermeans, intended for making holes in hard materials, such as rock and concrete. It is also applicable tobreakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) andfor hammers intended to work in any direction to perform riveting or chiselling work. It is not applicable toimpact drills with direct mechanical impact mechanisms. This part of ISO 28927 is not applicable to jack legtype rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but byan additional device).It is intended that the results be used to compare different models of the same type of machine.NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.