SAE J 2614-2009 弯曲和扩口的亚临界退火焊接,冷拔丝高强度(拉伸强度500 MPa)低合金钢液压管道

标准号：SAE J 2614-2009
中文标准名称：弯曲和扩口的亚临界退火焊接,冷拔丝高强度(拉伸强度500 MPa)低合金钢液压管道
英文标准名称：Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
标准类型：H48
发布日期：2009/9/28 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H48
国际标准分类号：49.025.01;77.120.99
引用标准：ASTM A 513-2008;EN 10305-2-2002;EN 10305-3-2002;EN 10305-4-2003;EN 10305-6-2005;ISO 3304-1985;ISO 3305-1985;ISO 4200-1991;ISO 4397-1993;ISO 4399-1995;ISO 5598-2008;ISO 6162-1994;ISO 6163;ISO 6164-1994;ISO 6605-2002;ISO 8434-1986;ISO 10583-1993;ISO 10763-1
适用范围：This specification covers sub-critically annealed electric resistance welded and cold-drawn single-wall high strength low alloy steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, cold forming, welding and brazing. The grade of material produced to this specification is of micro-alloy content and is considerably stronger and intended to service higher pressure applications than like sizes of the grades of material specified in SAE J 525 and SAE J 2467. Due to the alloy content of the material, the forming characteristics of the finished tube are equal to or better, when compared to SAE J 525 and SAE J 2467. Nominal reference working pressures for this tubing are listed in ISO 10763 for metric tubing and SAE J 1065 fo rinch tubing. CAUTION: when brazing or welding is used as a tube end joining method, the structural integrity of the tube material can potentially be compromised due to the degradation of the areas affected by the thermal effect applied to the tubing; therefore, the ISO 10763 and SAE J 1065 nominal reference working pressures may not be applicable. Brazed and/or welded tube assembly configurations made to specific geometry and components bill of material in association with this material, may require qualification testing in accordancd with ISO 19879 Test Methods for Hydraulic Fluid Power Connections. Cold forming the tube end configurations avoids this systemic testing by not compromising the tube material structural integrity.