IEC 61300-2-48-2009 纤维光学互连器件和无源元件.基本试验和测量程序.第2-48部分:试验.温度-湿度循环

标准号：IEC 61300-2-48-2009
中文标准名称：纤维光学互连器件和无源元件.基本试验和测量程序.第2-48部分:试验.温度-湿度循环
英文标准名称：Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling
标准类型：M33
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：M33
国际标准分类号：33.180.20
引用标准：IEC 61300-1;IEC 61300-3-1;IEC 61300-3-4
适用范围：This part of IEC 61300 details a procedure for determining the suitability of a fibre opticdevice or closure to withstand variations in humidity and temperature that may occur duringoperation, storage and/or transport. The test is intended to indicate the performance of suchdevices when exposed to heat and humidity followed by short-term freezing.In general terms, this test provides a high temperature to induce potential failures due tosoftening and expansion, a high humidity to encourage moisture absorption and swelling anda low temperature to facilitate ice formation, embrittlement and contraction.This test differs from other cyclic environmental tests, notably the damp heat cyclic testof IEC 61300-2-46 and the composite temperature-humidity cyclic test of 61300-2-21, byincorporating alternative levels of severity. This is achieved througha) a greater number of cycles;b) a greater cyclic temperature range;c) a decreased cyclic period.