BS EN 60317-19-1996 特种绕组线规范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜线.130级

标准号：BS EN 60317-19-1996
中文标准名称：特种绕组线规范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜线.130级
英文标准名称：Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130
标准类型：K12
发布日期：1996/2/15 12:00:00
实施日期：1996/2/15 12:00:00
中国标准分类号：K12
国际标准分类号：29.060.10
适用范围：This International Standard specifies the requirements of solderable enamelled round copper winding wire of class 130 with a dual coating. The underlying coating is based on polyurethane resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. Class 130 is a thermal class that requires a minimum temperature index of 130 and a heat shock temperature of at least 155 ℃. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is: —Grade 1: 0,050 mm up to and including 1,600 mm; —Grade 2: 0,050 mm up to and including 2,000 mm. The nominal conductor diameters are specified in clause 4 of IEC 317-0-1.