SAE AMS 4163E-2012 固溶处理并通过拉伸和矫正消除应力的6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)铝合金挤压件

标准号：SAE AMS 4163E-2012
中文标准名称：固溶处理并通过拉伸和矫正消除应力的6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti(2219-T3511)铝合金挤压件
英文标准名称：Aluminum Alloy, Extrusions 6.3Cu 0.30Mn 0.18Zr 0.10V 0.06Ti (2219-T3511) Solution Heat Treated and Stress-Relieved by Stretching, and Straightened
标准类型：V11
发布日期：2012/2/15 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V11
国际标准分类号：49.025.20
引用标准：ANSI H 35.2-2009;ANSI H 35.2M-2009;ASTM B 594-2009;ASTM B 660-2008;ASTM B 666/B 666M-2008;ASTM G 47-1998;SAE AMS 2355;SAE AMS 2772-1997;SAE ARP 823;SAE AS 1990-1990
适用范围：This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for structural parts requiring high strength up to 500 °F (260 °C) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication. Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.