IS 7719-1975

百检网 2021-08-04
标准号:IS 7719-1975
发布日期:1975/9/1 12:00:00
实施日期:1999/12/31 12:00:00
适用范围:Specifies the dimensions, tolerances, material and general requirements for metallic spiral wound gaskets for use in flange joints having flat or raised faces.1.1 The gaskets specified are for use with flanges of the following classes in nominal pipe sizes 10 mm to 600 mm and broadly classified under six different pressure ratings:a) For pressures up to and including 1 MPa* — Class 10b) For pressures above 1 MPa to 2 MPa —Class 20c) For pressures above 2 MPa to 4 MPa — Class 40d) For pressures above 4 MPa to 6 MPa —Class 60e) For pressures above 6 MPa to 10 MPa —Class 100f) For pressures above 10 MPa to 17·5 MPa —Class 1751.2 Appendix A contains alternate gasket and centering ring sizes to suit pipes and flanges to DIN specifications for information only.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司