BS EN ISO 10360-7-2011 产品几何技术规范(GPS).坐标测量机(CMM)的验收和复检试验.装有影像探测系统的坐标测量机(CMM)

标准号：BS EN ISO 10360-7-2011
中文标准名称：产品几何技术规范(GPS).坐标测量机(CMM)的验收和复检试验.装有影像探测系统的坐标测量机(CMM)
英文标准名称：Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs equipped with imaging probing systems
标准类型：N13
发布日期：2011/6/30 12:00:00
实施日期：2011/6/30 12:00:00
中国标准分类号：N13
国际标准分类号：17.040.30
引用标准：ISO 10360-1-2000;ISO 10360-2-2009;ISO 14253-1-1998;ISO 14660-1-1999;ISO/TS 23165-2006;ISO/IEC Guide 99
适用范围：This part of ISO 10360 specifies the acceptance tests for verifying the performance of a coordinate measuringmachine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies thereverification tests that enable the user to periodically reverify the performance of the CMM.The acceptance and reverification tests given in this part of ISO 10360 are applicable only to Cartesian CMMsusing imaging probing systems of any type operating in the discrete-point probing mode.This part of ISO 10360 does not explicitly apply to:- non-Cartesian CMMs; however, parties may apply this part of ISO 10360 to non-Cartesian CMMs bymutual agreement;- CMMs using other types of optical probing; however, parties may apply this approach to other opticalCMMs by mutual agreement;- CMMs using contact probing systems (see ISO 10360-2 for contact probing systems).This part of ISO 10360 specifies performance requirements that can be assigned by the manufacturer or theuser of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the statedrequirements, rules for proving conformance, and applications for which the acceptance and reverificationtests can be used.