SAE J 2894/1-2011 插入式电动车辆充电器的电源质量要求

标准号：SAE J 2894/1-2011
中文标准名称：插入式电动车辆充电器的电源质量要求
英文标准名称：Power Quality Requirements for Plug-In Electric Vehicle Chargers
标准类型：T36
发布日期：2011/12/8 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T36
国际标准分类号：43.120
引用标准：ANSI B 62.41;ANSI C 62.45;ANSI C 84.1-2006;IEC 61000-3-2-2005;IEC/TS 61000-3-4-1998;IEEE 519-1992;IEEE 1159-2009;IEEE 1547-2003;IEEE 2030.1;JEVS G101;SAE J 1772-2010;SAE J 1773-2009;SAE J 2293;SAE J 2847;SAE J 2894/2;UL 1741-2010
适用范围：The intent of this document is to develop a recommended practice for PEV chargers, whether on-board or off-board the vehicle, that will enable equipment manufacturers, vehicle manufacturers, electric utilities and others to make reasonable design decisions regarding power quality. The three main purposes are as follows: 1. To identify those parameters of PEV battery charger that must be controlled in order to preserve the quality of the AC service. 2. To identify those characteristics of the AC service that may significantly impact the performance of the charger. 3. To identify values for power quality, susceptibility and power control parameters which are based on current U.S. and international standards. These values should be technically feasible and cost effective to implement into PEV battery chargers. SAE J2894/2 Power Quality Requirements for Plug-In Electric Vehicle Chargers - Test Methods will describe the test methods for the parameters / requirements in this document.