BS EN 60695-2-13-2010 着火危险试验.基于灼热/发热丝的试验方法.材料的灼热丝着火点(GWIT)试验方法

标准号：BS EN 60695-2-13-2010
中文标准名称：着火危险试验.基于灼热/发热丝的试验方法.材料的灼热丝着火点(GWIT)试验方法
英文标准名称：Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
标准类型：C80
发布日期：2011/5/31 12:00:00
实施日期：2011/5/31 12:00:00
中国标准分类号：C80
国际标准分类号：13.220.40;29.020;29.035.01
引用标准：IEC 60695-1-30-2008;IEC 60695-2-10-2000;IEC 60695-2-11-2000;IEC 60695-2-12;IEC Guide 104-1997;ISO/IEC Guide 51-1999;ISO/IEC 13943-2008;ISO 291-2008;ISO 293-2004;ISO 294;ISO 295-2004
适用范围：This part of IEC 60695 specifies the details of the glow-wire test to be applied to testspecimens of solid electrical insulating materials or other solid materials for ignitability testingto determine the glow-wire ignition temperature (GWIT).The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum testtemperature, determined during this standardized procedure, at which the tested materiala) does not ignite, orb) if sustained and continuous flaming combustion does not occur for a time longer than 5 sfor any single flame event and the specimen is not totally consumed.This test is a materials test carried out on a series of standard test specimens. The dataobtained, along with data from the glow-wire flammability index (GWFI) test method formaterials, IEC 60695-2-12, can then be used in a preselection process in accordance withIEC 60695-1-30 to judge the ability of materials to meet the requirements of IEC 60695-2-11.NOTE As an outcome of conducting a fire hazard assessment, an appropriate series of preselection flammabilityand ignition tests may allow a reduction of end product testing.This basic safety publication is intended for use by technical committees in the preparation ofstandards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.One of the responsibilities of a technical committee is, wherever applicable, to make use ofbasic safety publications in the preparation of its publications. The requirements, test methodsor test conditions of this basic safety publication will not apply unless specifically referred to orincluded in the relevant publications.