IEC 60669-1 Edition 3.2-2007 家用和类似的固定电气设施用开关.第1部分:一般要求

百检网 2021-08-05
标准号:IEC 60669-1 Edition 3.2-2007
中文标准名称:家用和类似的固定电气设施用开关.第1部分:一般要求
英文标准名称:Switches for household and similar fixed-electrical installations - Part 1: General requirements
标准类型:L22
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:L22
国际标准分类号:29.120.40
适用范围:1 ScopeThis part of IEC 60669 applies to manually operated general purpose switches, for a.c. onlywith a rated voltage not exceeding 440 V and a rated current not exceeding 63 A, intended forhousehold and similar fixed electrical installations, either indoors or outdoors.For switches provided with screwless terminals the rated current is limited to 16 A.Switches covered by this standard are intended for the control in normal use of:– a circuit for a tungsten filament lamp load; or– a circuit for a fluorescent lamp load (including electronic ballast); or– a circuit for a substantially resistive load with a power factor not less than 0,95; or– a monophase circuit for motor load with a rated current up to 10 A and a power factor notless than 0,6; or– a combination of these.NOTE 1 An extension of the scope to switches for rated voltages higher than 440 V is under consideration.NOTE 2 An increase of the rated current of 10 A for motor load is under consideration.NOTE 3 For the time being, switches with a rated current more than 10 A are considered as a 10 A current formotor load switch.The standard also applies to boxes for switches, with the exception of mounting boxes for flushtype switches.NOTE 4 General requirements for boxes for flush-type switches are given in IEC 60670.It also applies to switches such as:– switches incorporating pilot lights;– electromagnetic remote control switches (particular requirements are given in the relevantpart 2);– switches incorporating a time-delay device (particular requirements are given in therelevant part 2);– combinations of switches and other functions (with the exception of switches combined withfuses);– electronic switches (particular requirements are given in the relevant part 2);– switches having facilities for the outlet and retention of flexible cables (see annex B);– isolating switches (particular requirements are given in the relevant Part 2).NOTE 5 The minimum length of the flexible cable used with these switches may be governed by National WiringRules.Switches complying with this standard are suitable for use at ambient temperatures notnormally exceeding 25 °C, but occasionally reaching 35 °C.NOTE 6 Switches complying with this standard are suitable only for incorporation in equipment in such a way andin such a place that it is unlikely that the surrounding ambient temperature exceeds 35 °C.In locations where special conditions prevail, such as in ships, vehicles and the like and inhazardous locations, for example where explosions are liable to occur, special constructionsmay be required.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司