BS EN ISO 10893-12-2011 钢管的无损测试.无缝和焊接钢管(埋弧焊除外)的全自动外围超声波厚度检测

标准号：BS EN ISO 10893-12-2011
中文标准名称：钢管的无损测试.无缝和焊接钢管(埋弧焊除外)的全自动外围超声波厚度检测
英文标准名称：Non-destructive testing of steel tubes. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
标准类型：H26
发布日期：2011/4/30 12:00:00
实施日期：2011/4/30 12:00:00
中国标准分类号：H26
国际标准分类号：23.040.10;77.040.20;77.140.75
适用范围：This part of ISO 10893 specifies requirements for the automated full peripheral ultrasonic testing of seamlessand welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for wall thicknessmeasurement. It specifies the testing method and corresponding calibration procedures.NOTE 1 Full peripheral testing does not necessarily mean that 100 % of the tube surface is scanned.NOTE 2 This test can be carried out simultaneously with full peripheral ultrasonic testing for the detection of laminarimperfections (see ISO 10893-8) using the same ultrasonic transducers for both inspection requirements. Under thesecircumstances, the minimum lamination size under detection determines the percentage of the tube surface for scanning,according to ISO 10893-8.This part of ISO 10893 can also be applicable to the testing of circular hollow sections.This part of ISO 10893 is applicable to the thickness measurement of tubes with a specified outside diameterequal to or greater than 25,4 mm and a minimum wall thickness of 2,6 mm, unless otherwise agreed on.