BS EN 12560-7-2004 法兰及其接头.分级标示法兰用垫圈.钢法兰用涂覆金属的套层垫圈

标准号：BS EN 12560-7-2004
中文标准名称：法兰及其接头.分级标示法兰用垫圈.钢法兰用涂覆金属的套层垫圈
英文标准名称：Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges
标准类型：J15
发布日期：2004/6/14 12:00:00
实施日期：2004/6/14 12:00:00
中国标准分类号：J15
国际标准分类号：23.040.80
适用范围：This European Standard specifies the construction, dimensions and marking of covered metal jacketed gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900. Class 1 500 for sizes up to and including NPS 24, and for Class designation 2 500 up to and including NPS 12. This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them. NOTE 1 Dimensions of other types of gaskets for use with flanges to prEN 1759-1, EN 1759-3 and EN 1759-4 are given in EN 12560-1, EN 12560-2, EN 12560-3, EN 12560-4, EN 12560-5 and EN 12560-6. NOTE 2 Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.