DIN EN ISO 23210-2009 固定污染源排放.烟气中钷10/钷2-5质量浓度的测定.低浓度下利用撞击计进行测量(ISO 23210：2009),德文版本EN ISO 23210:2009

标准号：DIN EN ISO 23210-2009
中文标准名称：固定污染源排放.烟气中钷10/钷2-5质量浓度的测定.低浓度下利用撞击计进行测量(ISO 23210：2009),德文版本EN ISO 23210:2009
英文标准名称：Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
标准类型：Z60
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Z60
国际标准分类号：13.040.40
引用标准：ISO 7708-1995;ISO 12141-2002;ISO 20988-2007
适用范围：This International Standard specifies a standard reference method for the determination of PM10 and PM2, 5 mass concentrations at stationary emission sources by use of two-stage inpactors. The measurement method is especially suitable for measurements of mass concentrations below 50 mg/m3 as half-hourly averages at standard conditions (273 K, 1013 hPa, dry gas). It is an acceptable method for the measurement in the flue gas of different installations such as cement and steel production as well as combustion processes. This International Standard is not applicable to sampling of flue gases that are saturated with water-vapour. This International Standard is not applicable where the majority of the particles are likely to exceed PM10 e. g. in case of raw gases or plant operating failures. This International Standard may not be used for the determination of the total mass concentration of dust.