ASME B18.31.1M-2008 米制连续和双端螺柱

标准号：ASME B18.31.1M-2008
中文标准名称：米制连续和双端螺柱
英文标准名称：Metric Continuous and Double-End Studs
标准类型：J13
发布日期：2008/9/3 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J13
国际标准分类号：21.060.10
引用标准：ASME B1.3;ASME B1.13;ASME B18.2.8;ASME B18.12;ASME B18.18.2;ASME B18.24;ASME Y14.5M;ASTM A 380;ASTM F 468M;ASTM F 568M;ASTM F 738M;ASTM F 788/F 788M;ASTM F 1941M
适用范围：1.1.1 This Standard covers the complete dimensionaland general data for continuous-thread anddouble-end metric series studs recognized as anAmerican National Standard. The following configurationsare covered:continuous-thread stud: studs that are threaded over theircomplete length.double-end stud (clamping-type): studs with screw threadsof the same length and configuration on each end. Thistype of stud serves the function of clamping two bodiestogether with a nut on each end.double-end stud (tap-end type): a stud designed to be installed in a tapped hole and usually with differentthreaded lengths on each end. The tap-end studs covered by this Standard have the same thread form on eachend with the length of the tap-end threads equal to approximately 11⁄2 times the nominal thread diameter.NOTE: Both types of double-end studs in this Standard may beinstalled with a nut on each end. Similarly, one end of each typemay be set in a tapped hole, usually with a locking compound.Double-end studs of the following body diametersare covered:(a) reduced-diameter body. See para. 6.1 fordimensions.(b) full body. See para. 6.2 for dimensions.1.1.2 The inclusion of dimensional data in thisStandard is not intended to imply that all productsdescribed are stock production items. Consumers shouldconsult with suppliers concerning availability of products.