BS EN ISO 8434-1-2007 液压传动和通用金属管连接.24度角连接器

标准号：BS EN ISO 8434-1-2007
中文标准名称：液压传动和通用金属管连接.24度角连接器
英文标准名称：Metallic tube connections for fluid power and general use - 24 degree cone connectors
标准类型：J15
发布日期：2007/9/28 12:00:00
实施日期：2007/9/28 12:00:00
中国标准分类号：J15
国际标准分类号：23.100.40
引用标准：ISO 48;ISO 228-1-2000;ISO 261;ISO 965-1-1998;ISO 1127;ISO 1179-1;ISO 1179-2;ISO 1179-4;ISO 3304;ISO 3305;ISO 3601-3-2005;ISO 4759-1-2000;ISO 5598-1985;ISO 6149-1;ISO 6149-2;ISO 6149-3;ISO 9227;ISO 9974-1;ISO 9974-2;ISO 9974-3;ISO 12151-2;ISO 19879-2005
适用范围：This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of plain end tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.) These connectors provide full-flow connections in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values are not to be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met. NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where the requirements of the application allow for the use of elastomeric seals, connector designs that conform to International Standards and incorporate elastomeric sealing are preferred. NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.4. This part of ISO 8434 also specifies a performance and qualification test for these connectors.