BS ISO 5414-2-2002 扁方筒形柄刀具用的带卡箍螺钉的刀具卡盘(立铣刀刀具卡盘架).第2部分:夹头的连接尺寸和命名

标准号：BS ISO 5414-2-2002
中文标准名称：扁方筒形柄刀具用的带卡箍螺钉的刀具卡盘(立铣刀刀具卡盘架).第2部分:夹头的连接尺寸和命名
英文标准名称：Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Connecting dimensions of chucks and designation
标准类型：J51
发布日期：2002/11/19 12:00:00
实施日期：2002/11/19 12:00:00
中国标准分类号：J51
国际标准分类号：25.060.20
适用范围：This part of ISO 5414 specifies the dimensions of tool chucks (end mill holders) with clamp screws for tools with flatted cylindrical shanks in accordance with ISO 3338-2. It also specifies the designations of these chucks. Two types of connection are defined: — chucks with 7/24 taper shanks in accordance with ISO 297 for manual changers and with ISO 7388-1 for automatic changers, for tool shanks with either single flat or a double flat for manual and automatic changers; NOTE 1 This part of ISO 5414 specifies the dimensions of tool chucks with 7/24 taper shanks No. 30 for automatic changers although these are not standardized. — chucks with Morse taper shanks in accordance with ISO 296 and ISO 5413 for tool shanks with a single flat only. NOTE 2 The dimensions of the driving system of the tool shanks are dealt with in ISO 5414-1.