BS EN 13648-3-2002 低温容器.防超压安全装置.要求释放量的测定.容量和尺寸

标准号：BS EN 13648-3-2002
中文标准名称：低温容器.防超压安全装置.要求释放量的测定.容量和尺寸
英文标准名称：Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
标准类型：J75
发布日期：2002/12/6 12:00:00
实施日期：2002/12/6 12:00:00
中国标准分类号：J75
国际标准分类号：23.020.40
适用范围：This standard provides a separate calculation method for determining the contributing mass flow to be relievedresulting from each of the following specified conditions:_ vacuum insulated vessels with insulation system (outer jacket + insulating material) intact under normalvacuum. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relievingpressure;_ vacuum insulated vessels with insulation system remaining in place but with loss of vacuum, or non vacuuminsulated vessels with insulation system intact. Outer jacket at ambient temperature. Inner vessel attemperature of the contents at the relieving pressure;_ vacuum or non vacuum insulated vessels with insulation system remaining fully or partially in place, but withloss of vacuum in the case of vacuum insulated vessels, and fire engulfment. Inner vessel at temperature ofthe contents at the relieving pressure;_ vessels with insulation system totally lost and fire engulfment.Good engineering practice based on well established theoretical physical science shall be adopted to determinethe contributing mass flow where an appropriate calculation method is not provided for an applicable condition.