ISO 15618-1-2001 从事水下焊接的焊接员资格检验 第1部分：高压湿焊的潜水焊接员

标准号：ISO 15618-1-2001
中文标准名称：从事水下焊接的焊接员资格检验 第1部分：高压湿焊的潜水焊接员
英文标准名称：Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding
标准类型：J33
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J33
国际标准分类号：25.160.01
适用范围：This standard applies to welding processes where the skill of the diver-welder has a significant influence on weld quality. This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of diver-welder performance for the welding of steels underwater in hyperbaric wet environment. The recommended format for the certificate of approval testing is given in Annex A. During the approval test the diver-welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved, information on these aspects is given in Annex B. This standard is applicable when the diver-welder's testing is required by the purchaser, by inspection authorities or by other organisations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanised welding. It does not cover fully mechanised and fully automatic processes (see 5.2). All new approvals should be in accordance with this standard from the date of this issue. However, this standard does not invalidate previous diver-welder approvals made to former national standards or specifications, providing the intent of the technical requirements is satisfied and the previous approvals are relevant to the application and production work on which they are employed. Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary to do the additional tests on a test piece which should be made in accordance with this standard. Consideration of previous approvals to national standards or specifications should be at the time of the enquiry/contract stage and agreed between the contracting parties. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.