IEC 61621-1997 干燥实心绝缘材料 耐高压低电流电弧放电的试验

百检网 2021-08-05
标准号:IEC 61621-1997
中文标准名称:干燥实心绝缘材料 耐高压低电流电弧放电的试验
英文标准名称:Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges
标准类型:K15
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:K15
国际标准分类号:29.035.01
适用范围:This International Standard describes a test method which can provide preliminary differentiation between similar insulating materials, with respect to their resistance to damage when exposed to high-voltage, low-current arc discharges, occurring close to their surfaces. The discharges cause localized thermal and chemical decomposition and erosion and eventually a conductive path forms across the insulating material. The severity of the test conditions is gradually increased: in the early stages a low-current arc discharge is repeatedly interrupted, whereas in the later stages, the arc current is raised in successive steps. Because of its convenience and because of the short time required for testing, the test method is applicable for preliminary screening of materials, for detecting the effects of changes in formulation and for quality control testing. Previous experience with this test, showed acceptable reproducibility with thermoset materials. Using thermoplastics, some testing laboratories report unacceptably large variation in test results which lead to the recommendation not to use the test for thermoplastics. NOTE - Attempts are being made to reduce the variability of the results of tests on thermoplastics by controlling the electrode pressure and depth of penetration into the material during the test. Without such electrode control, tests on many thermoplastics may not be sufficiently meaningful to be performed. This test method will not, in general, permit conclusions to be drawn concerning the relative arc resistance rankings of materials which may be subjected to other types of arcs. The ranking of materials may differ from that found in wet tracking tests (e.g. IEC60112, IEC 60587 and IEC 61302) and from their performance in service, where the intensity, recurrence frequency and time of exposure to arc discharges are very different.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司