2016年2月12日，FCC修订并发布信号放大器
1.废除版本KDB 935210 D01，其内容并入KDB 935210 D02；
2.FCC针对信号放大器引入一个新的监管框架结构，包括一个网络保护标准，涵括减少消费类信号放大器对无线网络的潜在干扰的技术和操作要求；
3.文件KDB 935210 D02认证要求，总结了运行在FCC parts 20、22、24、27 and 90内的信号放大器的认证要求、相关参数和工业与消费类信号放大器的定义；
4.文件935210 D03，提供消费类信号放大器的测量程序；
5.文件935210 D04，提供特殊供应商的消费类信号放大器的测量程序；
6.文件935210 D05，提供工业类信号放大器的测量程序。
原文如下：
FCC Report and Order(FCC 13-21 and rules modified per Order FCC-14-138)introduced a new regulatory framework for signal boosters，including the introduction of a Network Protection Standard that specifies the technical and operational requirements necessary to minimize the potential for interference from consumer signal boosters to wireless networks.These new requirements are codified in §§ 20.21 and 90.219.
The attachment 935210 D02 Certification Requirements summarizes the certification requirements and associated parameters and definitions for consumer and industrial signal boosters that operate under Parts 20、22、24、27 and 90 of the FCC rules.
The attachment 935210 D03 Signal Booster Measurements provides guidance for demonstrating compliance to the various requirements for Wideband Consumer Signal Boosters as specified in § 20.21(e)，Consumer Signal Booster Network Protection Standard Technical Requirements and Interference Safeguards.
The attachment 935210 D04 Provider-Specific Booster Measurements provides guidance for demonstrating compliance to the various requirements for Provider-Specific Consumer Signal Boosters as specified in § 20.21(e)，Consumer Signal Booster Network Protection Standard Technical Requirements and Interference Safeguards.
The attachment 935210 D05 Indus Booster Basic Meas provides guidance for demonstrating compliance to the various requirements for Industrial Signal Boosters.
Note: The previous attachment 935210 D01 has been expired and the content has been incorporated in 935210 D02.