| 1 | Size marking
鞋号 | GB/T 3293.1 | | The marking of size shall be included the length and width of foot, and the height of letter for marking shall be not less than 3 mm |
| 2 | Labeling and packaging
标示及包装 | HG/T 3084 | | Satisfactory |
| 3 | Yellowing for footwear
耐黄变 | HG/T 3689 | | Min 3 - 4 |
| 4 | Appearance: rubber plastics sandals and slippers
外观质量 -橡塑凉拖鞋 | HG/T 3086.3.4 | | No major defects |
| 5 | Tensile Strength for Outsole
外底拉伸强度 | GB/T 528 | SOLID SOLE
实心外底 | General: Min 7.8 MPa Imitation leather:Min 7.8 MPa SBS: Min 4.5 MPa Transparent sole: 7.5 Mpa |
CELLULAR SOLE
微孔外底 | PU material: Min 5.0 Mpa |
RUBBER VAMP STRAP
橡胶帮带 | Sandals: Min 14.0 MPa Slippers: Min 11.0 Mpa |
| 6 | Breaking Elongation
拉断伸长率 | GB/T 528 | SOLID SOLE
实心外底 | General: Min 320% Imitation leather: Min 150%
SBS: Min 500% Transparent sole: 300% |
CELLULAR SOLE
微孔外底 | PU material: Min 320% |
RUBBER VAMP STRAP
橡胶帮带 | Sandals: Min 400% Slippers: Min 360% |
| 7 | Abrasion Resistance of outsole
外底相对体积磨耗量 | QB/T 2884 | SOLID SOLE
实心外底 | Max 300 mm³ Imitation leather: Max 250 mm³ |
| 8 | Hardness for outsole (shore hardness)
外底硬度 | GB/T 531.1 | SOLID SOLE
实心外底 | General:Min 50shoreA Imitation leather:Min 75 shoreA SBS: Max 75shoreA Transparent sole: Min 50shoreA |
RUBBER VAMP STRAP
橡胶帮带 | Sandals: 45-65 shoreA Slippers: 45-65 shoreA |
| 9 | Hardness of footwear
硬度试验 | HG/T 2489 | CELLULAR SOLE
微孔外底 | EVA sole: min 30 AskerC Other material sole: min 50 AskerC |
| 10 | Upper Sole adhesion of whole shoes
帮底粘合强度 | GB/T 21396 | / | Min 1.6 N/mm |
| 11 | Apparent density of footwear
视密度试验 | HG/T 2872 | CELLULAR SOLE
微孔外底 | PU material: Max 0.6 g/cm³ EVA material: Max 0.3 g/cm³ Other material: Max 0.5 g/cm³ |
| 12 | Flexing Resistance of Outsole
鞋底耐折性能 | HG/T 2873 | SOLID SOLE
实心外底 | No cracking after 40000 cycles Not test for transparent sole |
CELLULAR SOLE
微孔外底 | No cracking after 40000 cycles |
| 13 | Compression set for footwear
压缩变形试验 | HG/T 2876 | CELLULAR SOLE
微孔外底 | EVA material sole: Max 35% Other material sole: Max 28% |
| 14 | Pull out strength of upper band
鞋帮带拔出力试验 | HG/T 2877 | / | Min 46 N (For Assembly shoe) Min 80 N (For Cemented Shoe) |
| 15 | Upper Pullout Strength of Footwear
鞋帮带拉出强度 | GB/T 22756 section 5.8 | / | Min 80 N (For Mould Shoe) |
| 16 | Static slip resistance for footwear
静态防滑性能试验 | HG/T 3780 | / | Dry: Min 0.35 Wet: Min 0.30 |
