SAE AMS 4195C-2002 4.4Cu 1.5Mg 0.60Mn溶液热处理、冷加工和沉淀硬化热处理的包铝铝合金薄板材和厚板材

标准号：SAE AMS 4195C-2002
中文标准名称：4.4Cu 1.5Mg 0.60Mn溶液热处理、冷加工和沉淀硬化热处理的包铝铝合金薄板材和厚板材
英文标准名称：Aluminum Alloy Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
标准类型：H61;V11
发布日期：2002/1/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H61;V11
国际标准分类号：49.025.20
引用标准：ASTM B 660-1996;ASTM B 660-2002;SAE AMS 2202;SAE AMS 2350BA-1989;SAE AMS 2355;SAE AMS 2355F-1992;SAE ARP 823;SAE ARP 823D-1997;SAE MAM 2202;SAE MAM 2355;MIL-H-6088
适用范围：This specification covers an aluminum alloy in the form of flat sheet and plate 0.500 inch (12.70 mm) and under in nominal thickness. Primarily for structural parts requiring a combination of good strength and maximum corrosion resistance. These products, when re-solution heat treated by the user, may not have the tensile properties shown. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.