4.2 | Toxicity(each group)毒性测试(每组) |
4.3 | Sharp edges利边 |
4.4 | Security and strength of safety-related fasteners安全紧固件强度测试 |
4.5 | Crack detection methods裂缝探测方法 |
4.6 | Protrusions突出物 |
4.7 | Brakes刹车 |
4.8 | Steering操纵系统 |
4.8.1
| Handlebar - Dimensions and end fittings尺寸及固定 |
4.8.2
| Handlebar grips车把手握把 |
4.8.3
| Handlebar stem -insertion-depth mark or positive stop车把手立管插入深度标记 |
4.8.4
| Steering stability操纵稳定性 |
4.8.5
| Steering assembly-Static strength and security tests静态强度及牢固性 |
4.8.6
| Handlebar and stem assembly - Fatigue test把手及立管疲勞 |
4.9 | Frame车架 |
4.9.1
| Impact test (Falling mass)冲击测试(重物下落冲击） |
4.9.2
| Impact test (Falling frame)冲击测试（车架下落冲击） |
4.10 | Front fork前叉 |
4.10.1
| General一般要求 |
4.10.2
| Front fork - bending fatigue test弯曲疲劳测试 |
4.11 | Wheels轮子 |
4.11.1
| Rotational accuracy真圆度 |
4.11.2
| Wheel/tyre assembly - Clearance轮子间隙 |
4.11.3
| Wheel/tyre assembly - Static strength test轮子静态强度测试 |
4.11.4
| Wheel retention轮子保持力测试 |
4.12 | Rims , Tyres and tubes轮缘,轮胎 |
4.13 | Pedals and pedal/crank drive system踏板和曲柄 |
4.13.1
| Pedal tread踏板面 |
4.13.2
| Pedal clearance踏板间隙 |
4.13.3
| Pedal spindle - Impact test踏板轴冲击 |
4.13.4
| Pedal/pedal spindle - Dynamic durability test踏板/踏板轴组件-动态疲劳测试 |
4.13.5
| Drive system - Static strenght test传动系统强度 |
4.13.6
| Crank assembly - Fatigue test曲柄组疲劳测试 |
4.14 | Saddles and seat-pillars座垫和座垫轴 |
4.14.1
| Limiting dimensions尺寸 |
4.14.2
| Seat pillar insertion-depth mark or positive stop座垫轴插入深度记号 |
4.14.3
| Saddle/seat pillar - Security test座垫和座垫轴强度 |
4.14.4
| Saddle - Static strength test座垫轴静态强度 |
4.14.5
| Seat pillar - Fatigue test座垫轴疲劳测试 |
4.15 | Chainguard链条盖 |
4.16 | Stabilizers辅助车轮 |
4.16.1
| Mounting and dismounting安装于拆卸 |
4.16.2
| Dimensions尺寸 |
4.16.3
| Vertical load test垂直载荷测试 |
4.16.4
| Longitudinal load test纵向载荷测试 |
4.17 | Luggage carriers行李架 |
4.18 | Lighting systems and reflectors照明系统及反射镜 |
5 | Instructions说明书 |
6 | Marking标签 |
